Backpacks are sometimes used as luggage, particularly as carry-on bags for airplane travel.
Backpacks form an essential part of the gear of the outdoor trekker and the urban backpacker, allowing more mobility and compactness than would be available to someone carrying most of their gear and clothing in a suitcase.
In addition to their use in outdoors pursuits, backpacks are sometimes used in other sports as well. Hydration packs, sometimes used by athletes and military personnel, carry water (in either a bladder or a rigid bottle) and have a tube connected to them from which the wearer can drink without removing the pack; this feature is also included in some more general-purpose hiking backpacks. Backpacks that carry skateboards have also become more popular in the youth culture.
One common special type of backpack (sometimes referred to as a technical pack or frame pack) is designed for backpacking and other outdoors activities. These type of packs are more complex than most other backpacks. Compared to backpacks used for more day-to-day purposes such as schoolbooks, such packs are designed to carry substantially heavier loads, and as a result most such packs attach not only at the shoulders but at the hips, using a padded hip belt to evenly distribute the weight of the pack to the legs and back for better balance and comfort (this is a must for long hikes and extensive trips through trails.) The often heavily padded and sometimes semi-rigid shoulder straps are mainly for balancing the weight. They usually (except for those used in ultralight backpacking) have a metal or plastic frame to support and distribute the weight of the pack. Larger packs of this type tend to have a subdivided main compartment. These trekking packs often have several pockets on the outside; they may also have lash points on the exterior (either directly attached to the frame or webbing loops), so that bulky items may be strapped on, although depending on the pack design and type of trek most backpackers will try to stuff everything into the pack. Multiday packs typically have a content between 60 and 100 liters (and are about 3ft /1 meter tall). Smaller packs with similar features are available for shorter trips.
The most common materials for such packs are canvas and nylon,(polyester), either ripstop fabric for lightweight packs or heavier fabric such as cordura for more typical usage. Most such packs are purpose-designed for the outdoors market; however, it is not uncommon for military surplus packing gear to be sold to outdoorspeople as well for the same purpose. The cheaper versions of the outdoor packs are often favoured by city trekkers; as they have a large volume and still carry relatively easily.
Outdoors packs, in addition to the distinction between external-frame and internal-frame, can be further subdivided based on the duration of trip a pack might be expected to be used on; daypacks hold supplies for a single day's hiking (size about 20-30 litres), while weekender bags can hold two to three day's worth of gear and supplies (sizes about 40-50 litres). Larger packs generally have no specific names but are designed to distribute the weight of increased numbers of gear and supplies for longer-duration trips (60-100 litres); such packs often include complex ergonomic support features to simplify the carrying of large amounts of weight. A third type with little or no frame at all, similar to the bookbags used by students and made of light fabric (often nylon ripstop, as mentioned above), is used in ultralight backpacking to eliminate the weight of the frame and heavy fabric used in more typical outdoors packs. Despite (or perhaps because of) their lesser weight, such packs are seldom less expensive than more typical, regular-weight packs. In addition, outdoors packs are designed for specific purposes such as kayaking canoeing, rock climbing, mmountaineering, cross country skiing, and other such activities.
A hydration pack is a type of hydration system built as a backpack or waist pack containing a reservoir or "bladder" commonly made of rubber or flexible plastic. The reservoir contains a capped mouth for filling with liquid and a hose that allows the wearer to drink hands-free. Most hoses end with a "bite valve" that opens when the user bites down on it; the valve may be protected by a dust cover. Some hydration packs are insulated to keep water from freezing or becoming warm. Reservoir sizes commonly range from 1.5 to 3.0 litres. Hydration packs are commonly used for outdoor recreational activities, such as hiking, bicycling, and kayaking, as well as for military maneuvers.
In short, hydration packs are small backpacks containing a bladder-like plastic sac to hold up to three liters of water or any other beverage for hands-free drinking; they are sometimes known as camelbacks, from the CamelBak company, the best-known manufacturer of the packs. Packs used in competitive strategic sports such as paintball and airsoft are often based on or actually are military gear.
Copyright © 2010. All rights reserved. Backpack